Modular corners are used to establish a connection between concrete metal formwork when perpendicular or non-perpendicular fractures occur. Modular literally means scale and size, and the modular corner is structurally similar to formworks. Also, the specifications and capabilities of the templates also apply to the modular corner. Standard modular corner production usually has a length of 1.5 meters, and Omran Sanat Paya recommends the same size to contractors. The construction of the modular corner consists of a top sheet and four belts punched in the edge and stiffening belts. There are two types of modular corners, which Omran Sanat Paya intends to introduce you to the types of modular corners in the rest of this article.
Modular corners are divided into two categories: outer corner and inner corner. The outer corner is used to connect two metal corners perpendicular to each other in the outer corner parts of the concrete surface. The outer modular corner is used for columns, walls, hangers, and the like, and the inner corner is used to connect the two corners of the formwork vertically. The only difference between them is that the inner part is covered with concrete and it is inverted relative to the desired angle. The internal modular corner is mostly used for concrete slab walls and ceilings. The angle of the outer corner is 90 degrees and has a chamfered corner of 1.5 x 1.5 cm, and the angle of the inner corner is 90 degrees and the corner is not chamfered. The dimensions of these corners are 10×10, which are produced with heights of 100, 150 and 200 centimeters.
The production of modular corners is necessary for molding columns, beams, angled walls and in places where we face perpendicular or non-perpendicular fractures on the concrete surface. In order to execute the corners of concrete structures, Omran Sanat Paya has started to manufacture modular corners and also special parts called external and internal modular corners in different shapes and sizes, which can be easily used at any level and section. The modular corner is produced in different dimensions, which Omran Sanat Paya Company examines the most commonly used dimensions of concrete formwork corners for you in the following section.
Outer corner weight:
Inner corner weight:
Corners are used to connect two perpendicular and non-perpendicular modular forms. Corners structurally behave like formworks and their structural characteristics are true to modular formworks. Corner formworks are divided into two categories; Inner and outer corners
For molding beams, columns and angled walls, and wherever we are faced with a break in the horizontal or vertical component on the concrete surface, we can use the outer and inner corner, which will be defined and compared in the following article. we pay
The standard dimensions of the outer corner are (5×5), (5×10) and (10×10) and its height includes 50, 100 and 150 cm. By default, their general angle is 90 degrees. It is possible to make other dimensions from the corners and form different angles with the feasibility of using it. This corner has a chamfer of 1/5 x 1/5 cm.
Multiple sections, mainly columns and beams, can be implemented using flat panels and adding simple pieces to them. These corners are used to connect two forms at right angles so that the outer parts cover the surface of the concrete and are commonly used to form columns and connect puter floor forms to hangers in beams. Two examples of external corner are punched corner and chamfered external corner. The outer corner includes the beam parts, the connection of the beam floor formwork to the hangers, etc. and the external modular corner is produced in various sizes and dimensions.
Internal corners are produced to connect two formworks at right angles. This corner includes parts of the shear wall, connecting the beam to the slab, etc. These corners, like the external corner, are responsible for the vertical connection of two forms; With the difference that they cover the inner part of the concrete surface, it is inversely related to the desired angle. The internal corners are used to form the internal corners of the walls, to connect the beam hanging forms to the concrete slab. The angle of the inner corner is 90 degrees like the outer corner. The dimensions of these corners are usually (10×10) or (15×15) with a height of one meter and 50 cm, however, it is also possible to produce with dimensions of 100 and 200 cm.
It is not possible to use the internal corners with the diversity of its external type, and the simple arrangement of the panels and the usability of the connecting elements should be considered. Internal corners no longer have the variety of their external type. The simple arrangement of the panel and the consumption of the elements should be considered. Basically, these corners are in the inner corners of the L walls and the connection of the beam hanger formwork to the concrete slab or the intersection of the shear walls to the columns with a larger width and uses of this type are limited. Modular corners in Omran Sanat Paya Company are provided according to the customer’s order.