Ceiling jack is also known as construction jack and reinforcement jack. This jack is used to keep the concrete form of the roof stable and also to bear the weight of the roof of the structure. Therefore, the Ceiling jackis used during the construction of the roof to prevent it from collapsing. It is used.
In principle, a roof jack can be considered as a type of roof support for roof structures, and the roof of the structure is of any model, whether it is a block beam, a monolith, or even an arch, etc., in order to be resistant and strong, it needs a Ceiling jack. The reason is the need to use molding equipment, especially in concrete roofs.
Roof or building jacks are widely used in construction projects, and there is an urgent need for these jacks in any structure, whether it is a residential building, or a commercial complex, or even a high-rise tower. it endures until the end of the construction of the project and also by using this widely used tool it is possible to frame the roofs of the structure as well, but the ability to use the building jack in loose and even uneven ground is very worthy of attention and therefore when using This tool will not sink deep in the loose ground, so the quality of the jack is very careful in making this jack, because the quality of the Ceiling jack will guarantee the bearing of the load from the roof during the construction of the structure.
Ceiling jacks can be used for many years due to their structure and high resistance, and this has led some people to buy second-hand jacks in recent years, because the strength and safety of this tool is still high even when it is second-hand, but in If the weight of your structure is high, it is better to use a new roof jack, the most important feature of this tool is that it can be repaired after improper use and damage.
The parts that make up all types of reinforcement jacks include the male part, the female part, and the thread. These three parts help the main holder to restrain the formwork and the structure, but the lower part of the Ceiling jack is made of a pipe and its diameter is 6 cm and 2 mm thick. The material of the upper part of the jack is often a pipe and its diameter is 5 cm with a thickness of about 2.5 mm, which is made in 2 models in terms of load bearing.
Light jacks bear less weight and pressure than the heavy model, but the important point is that the weight, dimensions and thickness of the jack are determined by the manufacturer and seller depending on the customer’s needs, so the holes installed in the male part of the jack are at 10 cm intervals. They help to adjust the height by a spring-loaded pin. These holes are connected with the help of various threads and bolts on the female part. Therefore, the design of the structure and the type of jack can determine whether the male part is fixed or movable. Among the most widely used reinforcement jacks based on their appearance, we can refer to the following two models:
One of the types of ceiling jack is the cruciform jack or the T-shaped jack. This jack is made in two fixed and mobile models, and in the mobile type, the cruciform part is movable, so it is easy to rotate this part in different angles and the same. It makes the mobile cross jack more flexible than other models and in the fixed type, the cross section of this jack is fixed, so due to the large width of the cross section of the jack, this type of jack can be used in any building structure, which makes The fixed jack is one of the best-selling Ceiling jacks, so the advantages of using the cross jack can be expressed as follows:
The design of the Iraqi ceiling jack or the U-shaped jack is such that it can be used for maintaining bridge beams, and one of its features is the ability to adjust the height, and among other good features of this jack, we can list the following:
The other name of this tool is Iraqi jack because this type of jack is often used in the construction industry of Iraq and the general customers of this style of jack are Iraqis.
Omran Sanat Paya Company manufactures all kinds of Ceiling jacks and modular scaffolds. Based on years of experience and a brilliant background, this collection is considered one of the successful manufacturers in our dear country of Iran, therefore you can contact the experts of this collection in addition to Get the price of the roof jack you need by using free advice on all construction operations.